DR. SRINIVASA RAO SANDEPUDI

Professor

Department of Electrical Engineering

National Institute of Technology, Warangal - 506004, Telangana, INDIA

: ssr@nitw.ac.in

: 8702462233

Interests: Power Converters; Electric Drives; Renewable Energy Systems

Specializations: Power Electronics, Electric Drives, Renewable Energy Systems 

Qualifications:

Degree

Specialization

Institute

B. Tech

Electrical Engineering

Regional Engineering College, Warangal, A.P

M. Tech

Power Electronics

Regional Engineering College, Calicut, Kerala

Ph. D

Electrical Engineering

National Institute of Technology, Warangal, A.P

 

Message

Course Taught

Academic Year 2017-18

4/4 B.Tech (EEE) 2-Sections
Solid Stae Drives
M.Tech (PED)
Electric Vehicles
M.Tech(PED)
Seminar -I
M.Tech (PED)
Seminar -II
M.Tech(PED)Power Electronic Simulation Lab

Academic Year 2016-17

         Course  
   Subject
 4/4 B.Tech (EEE)  2- Sections Solid State Drives
M.Tech (PED)Electric Drives
M.Tech (PED) Electric Vehicles
M.Tech (PED)Seminar -II
M.Tech (PED) Power Electronic Simulations Lab

 Academic Year 2015-16


Course
     Subject                      
 2/4 B.Tech (EEE) 2-Sections      Electrical Machines - I 
 4/4 B.Tech(EEE) 2 -Section      Solid State Drives 
  4/4 B.Tech (EEE)      Seminar 
 4/4 M.Tech (PED)      Seminar - II 

 

Academic Year 2014-15

Course
                   Subject
4/4 B . Tech (EEE)   Elective
  Electric Traction
3/4 B . Tech (EEE)
 Electrical Machines Lab-I
M.Tech (PED)
Electric Drives
M.Tech (PED)
Digital Signal Processors Lab
M . Tech (PED)
2/4 B.Tech (EEE) (  Section -A & B)
Seminar - I
Electrical Machines  -I


Academic Year : 2013-14

             Course          Subject
4/4 B.Tech(EEE) A-Section
Solid State Drives
4/4 B.Tech(EEE) B-Section
Solid State Drives
2/4 B.Tech (EEE) A-Section 
Electrical Machines -I
2/4 B.Tech(EEE) B-Section 
Electrical Machines -I
M.Tech (Power Electronics &Drives)
Digital signal Processors Lab
M.Tech(PED) 
Seminar-II                                  

Academic Year: 2010-11

Course

Subject

 4/4  B.Tech(EEE)

Solid State Drives

2/4 B.Tech(EEE)

Electrical Machines - I

 2/4  B.Tech(Chemical)

Basic Electrical Engineering Lab

2/4 B.Tech (Mechanical)

Basic Electrical Engineering Lab

3/4 B.Tech (EEE)

Electrical Machines Lab- II

M.Tech (PED)

Electric Traction

M.Tech(PED)

Electrical Drives

 Academic Year : 2011-12

Course

Subject

 4/4  B.Tech(EEE)

Solid State Drives

2/4 B.Tech (EEE)

Electrical Machines - II

M.Tech (PED)

Electric Traction

M.Tech(PED)

Electrical Drives

 2/4  B.Tech(Chemical)

Basic Electrical Engineering Lab

2/4 B.Tech (Mechanical)

Basic Electrical Engineering Lab

3/4 B.Tech (EEE)

Electrical Machines Lab- II

3/4 B.Tech (EEE)

Electrical Machines Lab- I

 Academic Year : 2012-13

Course

Subject

4/4  B.Tech(EEE)

Solid State Drives

2/4 B.Tech (EEE)

Electrical Machines - I

M.Tech (PED)

Electric Traction

M.Tech (PED)

Electrical Drives

M.Tech (PED)

Digital Signal processors Lab

 2/4  B.Tech(Chemical)

Basic Electrical Engineering Lab

2/4 B.Tech (Mechanical)

Basic Electrical Engineering Lab

3/4 B.Tech (EEE)

Electrical Machines Lab- II

3/4 B.Tech (EEE)

Electrical Machines Lab- I

 

Project Works Guided M. Tech (Power Electronics & Drives)

Academic Year 2015 -16

 Title of the Project/Thesis
    Name of the Student

An Artificial Intelligence Based Induction Motor Speed Control & Estimation using Conventional MRAS with a Dynamic Reference Model

      Ms. H.  Kavya   ( 132515)

Direct Torque control of Three Phase Induction Motor Drives

   M V V S S Vidya Sagar
        (142520)

Academic Year 2014-15


Title of Projects / Thesis

Name of Student



Control Algorithms of Distribution Static Compensator For

Power Quality Improvement

    Mr. A. Pranay  Kumar                        ( Roll No: 132502)    

Speed Control of PMSM using PI controller and MPC Techniques

     Mr. P. Ravindranath

     (Roll No: 092025)

High Efficiency Single Input Multiple output DC-DC Converter

      Mr. R. Sricharan

    (Roll No:102020)

Design and Implementation of Closed Loop Voltage Control of a Servo Motor Driving a High Voltage Electrical Isolator using DSP TMS320F28335

      Ms. Lakshmi Navya

        (Roll No: 132533)

Academic Year 2013-14

Sl.NoTitle of the Project/Thesis       Name of the Student        
1
Predictive Torque Controlled Induction Motor Drive
 Mr.B.Ranjit Kumar
( Roll No: 122516)
2
 Maximum Power Point Tracking of Solar Power Supply System                                                   
 Ms.Sanam Devi
(Roll No:122535)
3
Power Distribution Architecture for Vascular Imaging System
Mr.I Ganapai Rao
(Roll No:122512)

                                       

Academic Year   2010-11

Sl.No

Title of Project/Thesis

Name of student

1

Short Circuit Protection Scheme for Power MOSFET based low voltage high current converter.

Ms.VHNSharmila.  B

(092036)

2

Direct Torque control of Induction Motor using Space Vector Pulse Width Modulation

Mr. Y. Ravi Kumar

(092037)

3

Current Phase Lead Compensation in PFC

Boost Converters.

Mr.Mehtha PrashanthNaveen Chandra

(092016)

4

Double Frequency Buck Converter

Mr. Y. Raghuram

(092022)

5

Implementation of Efficient Transformerless Single Stage AC/DC Converter.

Mr. Sri Perambudur Nithin

(092030)

6

Design of Resonant Soft Switching Converter

Mr.Suresh Dondapati

(092033)

7

Adaptive Hysteresis Band Current Control Technique to Shunt Active Power Filter

Mr. Booka Ananda Kumar

(092003)

                                     

 Academic Year: 2011-12

Sl.No

Title of Project/Thesis

Name of student

1

Interleaved Active Clamp DC-DC Converter using Synchronous Rectifier

Ajay Krishnanan

(102001)

2

Design and Implementation of A Novel Bidirectional DC-DC Boost/Buck Converter

 Balla Bhaskar

(102002)

3

Design and Steady State Stability Analysis of Active Clamp ZVS DC-DC Buck Converter

E. Nagendra Babu

(102005)

4

Single Switch Soft Switched Isolated DC-DC Converter

Subojit Sarkar

(102030)

5

Design and Implementation of Double Buck-Boost  Converter for LED Lighting

T. Naveen Kumar

(102032)

                                         

Academic Year: 2012-13

Sl.No

Title of Project/Thesis

Name of student

1

 

Direct Torque Controlled Four Quadrant Induction Motor Drive

Dayakar Reddy. B

(112503)

2

Fuzzy Logic Based Direct Torque Control  to Improve the Performance of Induction Motor Drive

Deepak Gupta

(112505)

3

Reduction of Torque and Flux Ripple in Three Phase Induction Motor Drives

Naresh Kumar

(112523)

 

Journal Publication Details

Title of the Paper

Name of the Journal

Reference

Rotor Side Control of Wells  turbine Driven Variable Speed Constant    Frequency   Induction Generator

   Electric   Power components and Systems,

    U.S.A.Taylor & Francis Pub.

Vol. 33, No: 6, June 2005

Pp.587-596

A New Control Strategy for         Tracking Peak Power in a Wind or Wave Energy   System

International Journal of Renewable Energy

     Elsevier Pub. USA

Vol.34, June 2009

Pp1560-1566

Reliability Estimation for Power Factor Correction Circuits

Asian Power Electronics Journal

Honkong

Vol.3, No.1, September. 2009

Pp. 30-38

A Novel Harmonic Reduction Technique for Modular Isolated Boost Converter

Journal of Electrical Engineering,

Romania

Volume:10 No:2

Pp. 10-19, June 2010

An Improved current sharing method for paralleled DC/DC converter using fuzzy logic control

Journal of Electrical Engineering, Romania

Volume:10 No:2

Pp. 33-41,  June 2010

An Overview of Single Phase Telecommunication Converter Topologies: A Comparative Study

Majlesi Journal of Electrical Engineering                                                           

Iran

Vol. 4, No. 3, September 2010

Estimation of Reliability of a Interleaving PFC Boost Converter

Serbian Journal of Electrical Engineering

Serbia

Vol. 7, No. 2, November 2010, 205-216

Modified Direct Torque Control of Three Phase Induction Motor Drives with Low Ripple in Flux and Torque.

Leonardo Journal of Sciences Academic Direct Publishing House, Romania

Issue 18, Jan-June 2011. ISSN 1583 -0233 pp.27-44.

http://ljs.academicdirect.org

Modeling and Simulation of Direct Torque Controlled Induction Motor Drive using Slip Speed Control

 

Hardware Implementation of Direct Load Angle Controlled Induction Motor Drive


Direct torque controlled Induction Motor Drive  Based on Cascaded Three  Two-level Inverters

 

Enhanced weighting factor selection for predictive torque control of induction motor drive based on VIKOR method

 

 Finite control set predictive torque control for induction motor drive with simplified weighting factor selection using TOPSIS method

 

Improved Weighting Factor Selection for Predictive Torque Control of Induction Motor Drive Based on a Simple Additive Weighting Method

 

Selective Finite-States Model Predictive Control of Grid Interfaced 3L-NPC PV Inverter for Inherent Capacitor Voltage Balancing

 

 

Centralized Model-Predictive Decoupled Active-Reactive Power Control for 3L-NPC Photovoltaic Inverter with PSI Based Objective Prioritization  

International Journal of Modeling and Simulation, Canada



Electric Power Components and Systems, U.S.A.       

Taylor & Francis Pub.


   International Journal of Modeling and Simulation,   

  Canada

   Vol. 34, Issue 2,June 2014.  ACTA Press, Canada

 

 

    IET Electric Power Applications

    Vol. 10, Iss. 9, pp.877-888, 2016


 

         IET Electric Power Applications         

       Volume: 11, Issue: 5, 2017  pp .749- 760

       

Electric Power  Components and Systems

Taylor & Francis Pub 

Vol. No.: 45(13): pp.1450–1462  Dec. 2017

 

 IET Power Electronics

Vol. No.: 11  Issue:13, pp. 2072-2080.

2018.

                 

IET Power Electronics

DOI: 10.1049/iet-pel.2018.5825, 2018

  

Vol. 33, Issue 2, June 2013. ACTA Press,Canada.

 

 

 Vol. 42, No.4, pp.1505-1516

   Sept. 30, 2014


Conference Proceeding

1

  • Equal Area pulse width modulation for photovoltaic Applications

National conference on Application of Solar Energy-Recent Developments, CPRI, Thiruvananthapuram , 20 - 21  November , 1997.                                                              

2

  • Simulation of Transients in DC Motors, fed from Photovoltaic Supplies

National conference on Application of Solar Energy-Recent Developments, CPRI, Thiruvananthapuram , 20 - 21  November , 1997.                                           

3

  • Dynamic Analysis of D.C Shunt motors fed from  PV supplies

International Conference of the Contribution  of Cognition to Modelling, 6 to 8  July, 1998,  Claude-Bernard University of Lyon, France.                                                                                                                

4

  • Transient Analysis of Separately excited D.C. Motors fed from photovoltaic supplies with Step-up Converter

Tenth National Power Systems Conference, M.S. University of Baroda, 14  to16  Oct., 1998

5

  • DSP Controlled Variable Speed Constant Frequency Induction Generator for Wave Energy Applications

Australasian Universities Power Engineering Conference(AUPEC 2004), Brisbane,  Australia,  26 to 29  September, 2004 (International)

6

  • Simulation of Bi-Directional High Frequency Sinusoidal Inverter

National Conference on Recent Advances in Electrical Engineering, EAR - 2004, JNTU Anathapur,  December 4, 2004.

7

  • Simulation of sensor less Vector Control of Induction motor at zero frequency.

IEE Sponsored National Conference on Power Engineering Practices and Energy Management  (PEPEM). TIET, Patiala, Punjab   January 28 to 29, 2005

8

  • Implementation of Induction Machine Model in the Arbitrary Reference  Frame  using SIMULINK

National Conference on Emerging Trends in Electrical Engineering &   Power Drives, Govt. College of Engineering, Tirunelveli, 20th April, 2005.

9

  • Improving Voltage Regulation and Harmonic Elimination using Genetic Algorithm  in  PWM choppers

International Telecommunications Energy Conference (INTELEC 2005),Berlin,Germany, September 18 - 22, 2005.

10

  • Chopper Controlled Separately   Excited DC Motor using Digital Signal Processor.

International Conference on Computer Applications in Electrical Engineering Recent Advances (CERA 2005), Indian Institute of Technology, Roorkee, Sept.   28 to Oct.1, 2005.

11

  • Implementation of Vector Control of Induction Machine By Simplified Machine Model using MATLAB/SIMULINK

2nd National Power Electronics Conference (NPEC), Indian Institute of Technology Kharagpur, December 22 to 24, 2005.

12

  • Control of Induction Generator in a Wells Turbine Based Wave Energy System.

The Sixth IEEE International Conference on Power Electronics and Drive Systems (PEDS2005) Kuala Lumpur, Malaysia   28 Nov to 1 Dec 2005.

13

  • A Method of Tracking the Peak Power Points for a Wells Turbine Based Wave Energy System.

 7th International Power Engineering Conference (IPEC 2005) Singapore, 29 November to 2 December 2005

14

  • Thinking Ahead about the Energy of Tomorrow

All India Seminar and Exhibition with International Participation on Non-conventional  Energy   Sources and Urban/Rural Economy in Developing Countries (COGEN 2008), Organized by the Institution of Engineers (India) Nagpur Local Centre, Nagpur during  9 -10 February 2008. pp.1-5.

15

 

 

 

  • Extracting  Maximum  Power  from  a Wind or Wave Energy  System  using  a  Squirrel Cage  Induction  Generator

All India Seminar and Exhibition   with International Participation on Non- conventional Energy Sources and Urban/Rural Economy in Developing Countries (COGEN 2008), Organized by the Institution of Engineers (India) Nagpur Local Centre, Nagpur during 9 -10 February 2008. pp. 30 to 36.

16

  • A Novel Harmonic Reduction Technique For Modular Isolated Boost Converter

All India Seminar on Harmonics in Electrical Systems (causes & Remedies)  (HARMONICA 2009)conducted by the Institution of Engineers (India) Nagpur Local Centre, Nagpur,  November 28-29, 2009.

17

 

  • Reliability Consideration of Control Techniques for PFC Single Switch Boost Converter: A Comparative study

Joint International conference on Applied Systems Research and XXXIII National           Systems Conference  (NSC 2009), organized by Systems Society of India(SSI), November 27-29, 2009 conducted by Dayalbagh Education Trust, Agra, India.

18

  • Designing a Cost Effective Single Switch Isolated Multiple   Output Fly back Converter

IEEE International conference on Power, Signals, Controls and Computation (EPSCICON-2010) at Vidya Academy of science and technology, Thirssur, Kerala during Jan 03-06,2010.

19

  • A Novel Active Wave Shaping Technique for Single Phase Converter: A Comparative Study

National Conference on Smart Energy- Generation, Promotion & Conservation - 

2010  at Chitkara Institute of Engineering & Technology, Rajpura,15-16  January 2010.

20

  • Reliability Estimation of Interleaving Boost Converter

International Conference on Control, Communication and Computing (ICCCC) at College of Engineering, Trivandrum, Kerala during Feb18-20, 2010.

21

  • Simulation Study of Switched  Reluctance Motor using Linear Model

National Conference on Control of Power Electronic Drives and Systems (CPEDS 2010) conducted by  Dept. of Electrical Engineering, Andhra University, Visakhapatnam, 30-31,May 2010.                                                                                                                        

22

  • EMC Issues in Designing Power  Converter

National Conference on Control of Power Electronic Drives and Systems (CPEDS 2010) conducted by  Dept. of Electrical Engineering, Andhra University, Visakhapatnam, 30-31,May 2010.                                                                              

23

  • Direct torque control of induction motor for variable and constant switching frequency operation : A comparative study

National Conference on Control of Power Electronic Drives and Systems (CPEDS 2010) conducted by  Dept. of Electrical Engineering, Andhra University, Visakhapatnam, 30-31,May 2010.                

                                                                                                      

 24

  • Performance Comparison of Three Phase Telecom Converter Topologies: A survey, pp.197-205, Vlo.1.

International Conference on Electrical Power and Energy Systems (ICEPES), MANIT Bhopal, August 26 -28,2010                                                                           

25

  • Average Voltage Vector Control Technique for Torque Ripple Minimization in Induction Motor Drives, pp 363-369, Vo1.

International Conference on Electrical Power and Energy Systems (ICEPES), MANIT Bhopal, August 26 -28,2010                                                                         

26

  • Sensorless SVM-DTC Method for Induction Motor Drives based on Amplitude and Angle Decoupled Control of Stator Flux

International Conference on Power, Control and Embedded Systems(ICPCES), MNNIT,  Allahabad, 28 Nov. to 1 Dec, 2010.

27

  • An EMI Filter for Boost PFC Converter

International Conference on Power, Control and Embedded Systems(ICPCES), MNNIT,  Allahabad, 28 Nov. to 1 Dec, 2010.

28

  • Direct Torque Control Method for Induction Motor Drives based on Modified Amplitude and Angle Decoupled Control of Stator Flux

IEEE Power Electronic Drives & Energy Systems( PEDES-2010)-POWER INDIA  Conference,Dec 21 o 23, 2010 at India Habitat Center (IHC), New Delhi  (Jacaranda, Magnolia,Casuarinas).

29

  • Performance of Modular PFC Boost Converter using Average Current Control Technique  IEEE INDICON 2010 Conference organized by IEEE Calcutta Section at Kolkata, Jadavpur University  December 17-19, 2010.

30

  • Power Supply Architecture for Telecom Application: A Review

IEEE International Conference on Communication Control and Computing Technologies (ICCCCT), Kanyakumari, October 7 -10 ,2010.

31

  • Single Phase Converter Topologies for Telecom Application: A Comparative Study

  National Power Electronics Conference (NPEC-10) (June10-13, 2010)

32

  • Sensor less Direct Torque Control of Three Phase Induction Motor Drive Based on Stator Flux Control
  • IEEE India International Conference on Power Electronics (IICPE 2010) at Netaji Subhas Institute of Technology, New Delhi, India, 28-30 January 2011.

33

  • Modular PFC Boost Converter using Average  Current Control Technique
  • IEEE India International Conference on Power Electronics (IICPE 2010) at Netaji Subhas Institute of Technology, New Delhi, India, 28-30 January 2011.

34

  • Switching State Algorithm for Space Vector Pulse Width Modulation

IEEE India International Conference on Power Electronics (IICPE 2010) at Netaji Subhas Institute of Technology, New Delhi, India, 28-30 January 2011.

35

  • Direct Load Angle Control of Three Phase Induction Motors.

The Ninth IEEE International Conference on Power Electronics and Drive Systems (PEDS2011) Singapore   5 - 8 Dec 2011.

36

  • Direct Torque Control of Induction Motor Drives for Optimum Stator Flux and Torque Ripple.

The Ninth IEEE International Conference on Power Electronics and Drive Systems (PEDS2011) Singapore   5 to 8 Dec 2011.

37

 

Seventeenth National Power Systems Conference, IIT(BHU) Varanasi, 12 - 14, Dec. 2012

Improved Direct Torque Control Method for Induction Motor Drive under Low Speed Opera

38

·         Encoderless Model Predictive Direct Torque Control of Induction Motor Drive based on MRAS

 IEEE- ICECCT-2015, SVS college of Engineering Coimbatore, Tamil Nadu, 5-7th March 2015

39

·         Conventional and Model Predictive Direct Torque Control Techniques for Induction     Motor Drive.

IEEE First International Conference on Power Electronics, Intelligent Control and Energy Systems (ICPEICES 2016) 4-6 JULY, 2016, Delhi Technological University, Main Bawana Road, Delhi-110042, India.

40

·         Variable Conductance Factor Based Control of Multi-functional Grid Connected Single Stage Solar PV System

IEEE First International Conference on Power Electronics, Intelligent Control and Energy Systems (ICPEICES 2016) 4-6 JULY, 2016, Delhi Technological University, Main Bawana Road, Delhi-110042, India

41

·         Simplified Finite Control Set Model Predictive Control for Induction Motor Drive without Weighting Factors.

     IEEE International Conference on Power Electronics, Drives and Energy Systems     

     (PEDES- 2016) 14-17 December 2016, Mar Baselios College of Engineering 

     Trivandram

42

·         Improved Model Predictive Current Control for Single-Phase NPC Shunt Active Power Filter.

IEEE International Conference on Power Electronics, Drives and Energy Systems     

(PEDES- 2016) 14-17 December 2016, Mar Baselios College of Engineering      Trivandrum

43

·         Model Predictive Current Control with Modified Synchronous Detection Technique for Three-Phase 3 Level NPC Multi-Functional Solar Photovoltaic System

IEEE International Conference on Power Electronics, Drives and Energy Systems     

     (PEDES- 2016) 14-17 December 2016, Mar Baselios College of Engineering 

     Trivandrum

44

 

 

 

45

·         Predictive Torque Control of Induction Motor Drive with Simplified Weighting Factor Selection

IEEE International Conference on Power Electronics, Drives and Energy Systems     

(PEDES- 2016) 14-17 December 2016, Mar Baselios College of Engineering 

   Trivandrum

  • A Novel Fault-Tolerant Converter Topology for Induction Motor Drive

IEEE International Conference on Power Electronics, Drives and Energy Systems    

(PEDES- 2018) 18-22 December 2018, IIT Madras, Chennai.


Ph.D.'s Supervised

1).  Scholar  Name: T. Vinay Kumar         Title: Reduction of Torque and Flux Ripple in Direct Torque Controlled Three Phase Induction Motor Drive      Year: 2015

2). Scholar Name : M.Vishnu Prasad       Title : Simplified Weighting Factor Selection for Predictive Torque Control of Induction Motor Drives  Year: 2017


Workshop/SSTPs/Conference Organized

  • Workshop on Switched Mode Power Conversion (Sponsored by TEQIP) 18-22 June 2007. (One Week)
  • MHRD workshop on Switched Mode Power Conversion and Advanced Electric Drives, July 28th - August 9th, 2008. (Two Weeks)
  • Workshop on Simulation, Modeling & Control of Power Converters (Sponsored by TEQIP) 9-13 June 2008. (One Week)
  • National Conference on Power Electronics & Drives (Sponsored by TEQIP) 28- 29 June 2008. (Two Days)
  • National Workshop on Model Based Digital PWM Control Techniques for Power Electronics Applications 25-26 October 2013. (Two Days)
  • One day Workshop on Rapid Prototyping Systems 27-09-2014 (One Day)
  • Three Day Short term course on Digital Signal Processor Controlled Power Electronic Converters & Drives, September 28-30, 2015 (under NaMPET)       

DST/AICTE/MHRD or Other Sponsord R&D Projects

 

S.No

Name of the  Agency

Title

Amount (Rs.)

Year

1

DST-SERB

New Delhi

Investigations on  Multi-level Converter Interfaced Bi-Polar DC Micro-grids with Adaptive Centralized Energy Management System

Rs. 54,80,420=00

August 2017

2.

CPRI-RSoP, Bangalore

Investigations on Control Flexibilities of Grid Integrated Solar Photo Voltaic Energy Conversion System

Rs. 31,10,000=00

November  2018

 

Awards And Honours:

  • Received second prize from ISTE, New Delhi (Sponsored by L & T Mumbai) for National level best M. Tech Thesis guidance in the year1998.
  • Served as a Member in Technical Programme Committee of 2nd National Power Electronics Conference (NPEC) held at I I T Kharagpur in the year 2005.
  • Selected as an Official Referee for the Transactions of Association of the Advancement of  Modelling & Simulation  (AMSE), Lyon, France, 2005.
  • Elected as Chartered Engineer by the Institution of Engineers (India) in the year 2005.
  • Elected as Life Fellow by the Society of Power Engineers (India) in 2011.
  • Chaired one Session of International Conference on Power, Control and Embedded Systems (ICPCES-2010)  held at Motilal Nehru National Institute of Technology,Nov 28 - Dec 1, 2010.
  • Served as a Member in Technical Programme Committee of National Systems Conference 2010(NSC 2010), held at NITK Surathkal, Karnataka, Dec. 2010.
  • Served as a Member in Technical Program Committee of International Conference on Power, Control and Embedded Systems (ICPCES-2010) held at Motilal Nehru National Institute of Technology, Nov 28 - Dec 1, 2010.

Additional Responsibility

 A). Institute Level:

  • Working as an Advisor for the IE (India) Student's Chapter for Electrical Engineering students at N I T Warangal from the academic year 2007-08.
  • Worked as a Advisor for Electrical maintenance works of NIT Warangal Campus for  three years from 2008 - 2011.
  • Worked as a Warden for NIT Hostels from 1997 to 2000.
  • Worked as a Staff Advisor for Electrical Engineering Association (EEA) for the Academic year 2001 - 2002.
  • Worked as Warden for Institute Food Court (IFC) since July 2012.
  •  Worked as  Deputy Chief Warden for NIT Warangal Hostels from 06/1/2014 to 30 /1/ 2015
  • Worked as Member in EUPHRATES (European Union for Promotion of Health through Research, Applied Technology, Edn. and Sci. in India) (from December 2013)
  • Worked as a Chief Warden for NITW Hostels from 03/07/2017 to 23/06/2018.
  • Working as a Head  Department of Electrical Engg. from 22/11/2018

 B). National Level.

  • Worked as Honorary Secretary for the Institution of Engineers (India) Warangal Local Centre. (October 2008 - October 2010).
  • Worked as a Office bearer for the Central Counseling Board(CCB) [AIEEE 2009 Admissions] Ministry of Human Resources Development, New Delhi.
  • Working as Secretary for the (CCB-2009) [AIEEE 2009 Admissions] Ministry of Human Resources Development, New Delhi since 25/01/2012.

Membership in Professional Bodies:       

        Indian Society for Technical Education(ISTE)         Life Member           LM 20270

        Systems Society of India (SSI)                                    Life Member                LM  20006     

        Institution of Engineers (India)                                   Life Member               M129215-8

        IEEE Member    (USA)                                                  Senior  Member             91175000

        Society of Power Engineers (India)                           Life Fellow                   LF/5320 

        Instrument Society of India                                         Life Member                LM 2103  

Additional Information: 

Additional Qualifications: Diploma in Management(DIM), Post Graduate Diploma in Management (PGDIM),
Post Graduate Diploma in Human Resources Management (PGDHRM), Master of Business Administration (Human Resources Management)             


Course Taught Previously

 

Publications

 

PHDs Supervised

 

Workshops/Conferences

 

Projects

 

Awards and Honors

 

Additional Responsibility